Yazar "Aysan, Hamza" seçeneğine göre listele
Listeleniyor 1 - 3 / 3
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Doğal mineral (Şabazit) kullanılarak adsorpsiyon yöntemi ile sudan krom (VI) ve nikel giderimi(Selçuk Üniversitesi Fen Bilimleri Enstitüsü, 2014-08-27) Aysan, Hamza; Erdirençelebi, DilekBu çalışmada, doğal bir materyal olan " Şabazit " mineralinin, sulu çözeltilerden Nikel (II) ve Krom (VI) toksik ağır metal iyonlarını adsorplama kabiliyeti karakterize edilmiştir.Krom (VI) ve. Nikel (II) giderimi üzerine adsorban miktarı, pH, sıcaklık ,temas süresi ve giriş konsantrasyonunun etkisi incelenmiş ve optimum değerler elde edilmiştir. Deneysel sonuçlar Langmuir, Freundlich ve Temkin izoterm modelleri uygulanarak değerlendirilmiştir. Elde edilen verilere göre her iki metal iyonunun adsorpsiyonu en iyi Freundlich izotermlerine uygunluk göstermiştir. Elde edilen sonuçlara göre en iyi giderim Cr (VI) iyonu için; 20 g/L adsorban dozunda, 200 rpm karıştırma hızında, pH 3'de, 100 mg/L giriş konsantrasyonunda ve 120 dakika denge süresinde % 79 giderim verimi elde edilmiştir. Nikel (II) iyonu için; 1,5 g/L adsorban dozunda, 200 rpm karıştırma hızında, pH 8'de, 100 mg/L giriş konsantrasyonunda ve 90 dakika denge suresinde % 75 giderim verimi elde edilmiştir. Her iki metal iyonu için ΔG0, ΔH0 ve ΔS0 gibi termodinamik parametreler de değerlendirilmiş, adsorpsiyon kendiliğinden gerçekleşmektedir. Ayrıca adsorpsiyon kinetiğine bakılmış ve Pseudo ikinci derece kinetik modele uyduğu tespit edilmiştir. Bu çalışmanın ortaya koyduğu sonuçlar doğrultusunda şabazit mineralinin sulu çözeltilerden ağır metal gideriminde adsorplama kabiliyetinin oldukça yüksek olduğu söylenebilir.Öğe The effect of pH on removal of Cr (VI) by using chabazite(Selçuk Üniversitesi, 2014) Aysan, Hamza; Guclu, Dunyamin; Karakaya, Muazzez CelikIn this study,The natural material chabazite was investigated for its ability to remove chromium(VI) from aqueous solution by batch adsorption experiments.. The effect of operating parameter pH on the adsorption was investigated.The influences of pH (3 to 11) have been reported at keeping constant conditions (Initial concentration=100 mg/L, agitation rate=200 rpm ,temperature = 298 K, contact time 120 min). The results show that adsorption of Cr (VI) strongly depends on the pH of the solution,.The capacity of adsorption of Cr(VI) increased at lower pH'a The maximum adsorption capacity was obtained at pH 3.0. The maximum removal of Cr (VI) was found to be 5 mg/g.Öğe Use of chabazite, a naturally abundant zeolite, for the investigation of the adsorption kinetics and mechanism of methylene blue dye(ELSEVIER SCIENCE BV, 2016) Aysan, Hamza; Edebali, Serpil; Ozdemir, Celalettin; Karakaya, Muazzez Celik; Karakaya, NecatiChabazite, one of the common types of zeolite, was used in our study to remove methylene blue (MB) dye from aqueous solutions. The characterization of chabazite was performed using scanning electron microscope (SEM), Fourier Transform infrared (FTIR), X ray diffraction (XRD), and thermogravimetric-differential thermal analyses TG/DTA. During the experimental study, the effects of some parameters, such as contact time, adsorbent dosage, pH, stirring speed, and concentration, on the removal efficiency of chabazite were taken into consideration. To evaluate the experimental data, Langmuir, Freundlich, and Tempkin isotherm models were used. The experimental data were well fitted to the Langmuir isotherm model, with a correlation coefficient of 0.95. The adsorption kinetics of MB dye on chabazite could be described by a pseudo second-order model. (C) 2016 Elsevier Inc. All rights reserved.