Solid Particle Erosion Wear of GF/EP Composites with Added Al(2)O(3)

Basit Öğe Kaydı
dc.contributor.authorBağcı, Mehmet
dc.contributor.authorİmrek, Hüseyin
dc.date.accessioned2020-03-26T18:05:01Z
dc.date.available2020-03-26T18:05:01Z
dc.date.issued2010
dc.departmentSelçuk Üniversitesien_US
dc.descriptionInternational Conference on Advances in Materials and Processing Technologies -- OCT 24-27, 2010 -- Ctr Arts & Metiers ParisTech, Paris, FRANCEen_US
dc.description.abstractThis study has targeted to investigate wear behavior of a sort of new composite material where Al(2)O(3) (approximate to 150 mu m) particles were added to glass fiber and epoxy resin (GF/EP) at an amount of 15% and 30%. The method used in the tests, was the one that use dry and compressed air to accelerate abrasive particles onto a specimen and from there the wear formed was investigated. Striking speed was determined with the help of a double disc method by making use of pressure difference, whereas impinging angles were set by turning the specimen holder around its axis. As a result, in this experimental study, solid particle erosion behavior of a new formed composite material was investigated and erosion rates computed where three different impinging angles (30 degrees, 60 degrees and 90 degrees), three different striking speeds (23, 34 and 53 m/s) and two different fiber directions (0 and 45) were used to enable angular aluminum abrasives with average diameter of 400 mu pm to bombard target specimens to undertake the tests. In addition, the study presents microscopic views of the specimens after undergoing the tests.en_US
dc.description.sponsorshipCtr Arts & Metiers ParisTech, MINES ParisTech, Centrale Nantes, ENI St Etienne, Univ Valenciennes, Oxford, Transvaloren_US
dc.identifier.citationBağcı, M., İmrek, H., (2010). Solid Particle Erosion Wear of GF/EP Composites with Added Al(2)O(3). International Conference on Advances in Materials and Processing Technologies, Pts One and Two, 1315, 1389-1394. DOI: 10.1063/1.3552380
dc.identifier.endpage1394en_US
dc.identifier.isbn978-0-7354-0871-5
dc.identifier.issn0094-243Xen_US
dc.identifier.startpage1389en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12395/25268
dc.identifier.volume1315en_US
dc.identifier.wosWOS:000287169300226en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.institutionauthorBağcı, Mehmet
dc.institutionauthorİmrek, Hüseyin
dc.language.isoenen_US
dc.publisherAMER INST PHYSICSen_US
dc.relation.ispartofInternational Conference on Advances in Materials and Processing Technologies, Pts One and Twoen_US
dc.relation.ispartofseriesAIP Conference Proceedings
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectGF/EPen_US
dc.subjectAl(2)O(3)en_US
dc.subjectSolid Particle Erosion Wearen_US
dc.subjectErosion Rateen_US
dc.titleSolid Particle Erosion Wear of GF/EP Composites with Added Al(2)O(3)en_US
dc.typeConference Objecten_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
5268.pdf
Boyut:
561.58 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği/Makale Koleksiyonu