Preparation of Epoxy Composites With CTAB-Modified BN and MWCNTs

Basit Öğe Kaydı
dc.contributor.authorOzaytekin, Ilkay
dc.contributor.authorTuredi, Hamza Ercan
dc.contributor.authorAhmetli, Gulnare
dc.date.accessioned2020-03-26T19:25:45Z
dc.date.available2020-03-26T19:25:45Z
dc.date.issued2016
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, multi-walled carbon nanotubes (MWCNTs) and boron nitride (BN) were functionalized with cetyltrimethylammonium bromide (CTAB) at both pH 5.5 and pH 11. These MWCNT-CTAB and BN-CTAB particles used to prepare the composites were dispersed in a bisphenol A (DGEBA)-type epoxy resin (ER) system at room temperature. The TGA analysis showed that the BN composite can significantly improve the thermal stability of neat ER at temperatures above 400 degrees C. The curing degrees of the nanocomposites were calculated to be approximately the same values as neat ER using the Beer-Lambert law from FTIR spectra. The best electrical conductivity of the composites obtained was 3.10 x 10(-3) S/cm for ER/MWCNT-CTAB (pH 5.5). The surface hardness, Young's modulus, and tensile strength of the composites were examined. The surface hardness values of the ER/MWCNT-CTAB composites were higher than those of the other composites. The composite morphology was characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). (C) 2015 Society of Plastics Engineersen_US
dc.description.sponsorshipSelcuk University Scientific Research FoundationSelcuk University [14401083]en_US
dc.description.sponsorshipContract grant sponsor: Selcuk University Scientific Research Foundation; contract grant number: 14401083.en_US
dc.identifier.doi10.1002/pc.23542en_US
dc.identifier.endpage3432en_US
dc.identifier.issn0272-8397en_US
dc.identifier.issn1548-0569en_US
dc.identifier.issue12en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage3423en_US
dc.identifier.urihttps://dx.doi.org/10.1002/pc.23542
dc.identifier.urihttps://hdl.handle.net/20.500.12395/33901
dc.identifier.volume37en_US
dc.identifier.wosWOS:000389208200011en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWILEY-BLACKWELLen_US
dc.relation.ispartofPOLYMER COMPOSITESen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.selcuk20240510_oaigen_US
dc.titlePreparation of Epoxy Composites With CTAB-Modified BN and MWCNTsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu