Elastic-Plastic Stress Analysis of Thermoplastic Composite Beams Under Temperature Distributed Linearly

Basit Öğe Kaydı
dc.contributor.authorSayman, Onur
dc.contributor.authorKarakuzu, Ramazan
dc.contributor.authorDağhan, Behçet
dc.contributor.authorKoçak, Saim
dc.date.accessioned2020-03-26T16:39:02Z
dc.date.available2020-03-26T16:39:02Z
dc.date.issued2002
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractIn this study, an elastic-plastic thermal stress analysis is carried out on a thermoplastic composite beam. Temperature is chosen to vary linearly along the sections of the beam. The beam is made of steel fibre thermoplastic matrix composite. It is fixed by two rigid planes at the ends. The solution is performed for 0degrees, 45degrees, 60degrees and 90degrees orientation angles. The orientation angle of 30degrees does not give any plastic yielding, for it melts before plastic yielding. The intensity of the residual stress component of sigma(x) is maximum at the upper and lower surfaces of the beam and is obtained to be the greatest for the orientation angle of 0degrees. The equivalent plastic strain is found to be the greatest for 0degrees and 60degrees orientation angles. Plastic yielding begins on the beam at the highest temperature for 45degrees orientation angle.en_US
dc.identifier.citationSayman, O., Karakuzu, R., Dağhan, B., Koçak, S., (2002). Elastic-Plastic Stress Analysis of Thermoplastic Composite Beams Under Temperature Distributed Linearly. Journal of Thermoplastic Composite Materials, (15), 193-208. Doi: 10.1177/0892705702015003443
dc.identifier.doi10.1177/0892705702015003443en_US
dc.identifier.endpage208en_US
dc.identifier.issn0892-7057en_US
dc.identifier.issn1530-7980en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage193en_US
dc.identifier.urihttps://dx.doi.org/10.1177/0892705702015003443
dc.identifier.urihttps://hdl.handle.net/20.500.12395/17950
dc.identifier.volume15en_US
dc.identifier.wosWOS:000175391800002en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorDağhan, Behçet
dc.institutionauthorKoçak, Saim
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofJournal of Thermoplastic Composite Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectelastic-plasticen_US
dc.subjectthermoplastic composite beamen_US
dc.subjectthermal loaden_US
dc.subjectresidual stressen_US
dc.titleElastic-Plastic Stress Analysis of Thermoplastic Composite Beams Under Temperature Distributed Linearlyen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
sayman2002 (1).pdf
Boyut:
176.42 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği/Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu